Files Available for Download - Technical Service |
|
| DC-2277.pdf |
391Kb |
Details release of new thermal relief devices that must be installed in a properly designed lubricant supply system to reduce pressure spikes due to thermal expansion. |
| DC2274.pdf |
404Kb |
Describes the introduction of a new 24 VDC solenoid valve that is fully serviceable. |
| DC-2259.pdf |
49Kb |
Details possible air leakage that can be expected due to the air logic operation of the PMV pumps. Includes a short video of what to expect during normal operating conditions. |
| DC-2257.pdf |
55Kb |
Details possible separation between the outlet body and pump tube on PMV grease pumps. Lists all affected models, describes separation issues, and provides details on repair and/or replacement. |
| DC-2256.pdf |
44Kb |
Details possible separation between the outlet body and pump tube on PMV fluid/oil pumps. Lists all affected models, describes separation issues, and provides details on repair and/or replacement. |
| DC2251.pdf |
131Kb |
Details additional instructions placed on Model 3614/3624 Waste Oil Drains that must be used to operate units correctly. |
| DC2250.pdf |
54Kb |
Details procedural changes in installation of hoses on Lincoln Fluid Reels-94XXX series. |
| DC2249.pdf |
33Kb |
Lincoln is pleased to announce another improvement to our FlowMaster line of 120/230 VAC lubrication pumps. |
| DC-2237.pdf |
96Kb |
Details improvements to the SLV injector series that will ensure expected service life of the injectors. |
| DC2236.pdf |
121Kb |
Details isolated reports of possible "Pulling Apart or Separating" of Outlet Body and Pump Tubes on 3" PMV 50:1 Grease Pumps. |
| DC-2234.pdf |
216Kb |
Details newly released improvements to the FlowMaster product line directed toward increasing service life and minimizing unwarranted downtime. |
| DC-2224.pdf |
382Kb |
Details new procedures implemented in house for setting the Flow Control Valve on all Centro-Matic FlowMaster Hydraulic Pumps. |
| DC2219.pdf |
35Kb |
Details required changes in Zinc and Yellow Chromate plating practices and describes color variations of common "yellow" to a "silver" hue. |
| DC2216.pdf |
90Kb |
Introduces new leak proof fitting, model 700506, for use in Centralized lube systems (up to 10,000 psig) and clarifies correct usage of the original 5045 leak proof fitting in applications up to 5,000 psig. |
| DC2214.pdf |
239Kb |
Details the release of two upgrade kits to enable easy conversion to current day 82206 and 84275 Heavy-Duty Reels. |
| DC-2212.pdf |
1041Kb |
Provides detail of release of Series "B" SL-V Injectors and describes changes in detail. Includes product drawings and latest technical service page offering. |
| DC2208.pdf |
132Kb |
Affected Model(s): 85487, 86258, 85244, 85585, 85671, 85220 -- Hydraulic Motor Support Bracket. We are pleased to announce the release of the new 86265 support bracket for use with
the standard 60, 90, and 120 pound pump and bucket models listed above. The
bracket is also easily adaptable for other containers. The bracket was released as a
result of ongoing concerns regarding hydraulic motors that were loosening in high
vibration or high shock applications. |
| DC-2206.pdf |
346Kb |
Details on release of hoses and inlet swivels. |
| DC2205.pdf |
170Kb |
We are pleased to announce an enhanced fluid piston assembly for our 282396 (3:1) and 84933 (5:1) bare pumps and all associated Series 25 and 40 models. |
| DC2204.pdf |
129Kb |
Off-Season Maintenance Procedure for Lincoln Quicklub Automatic Lubrication System -203 Style Pumps
|
| DC-2177.pdf |
255Kb |
Installation instructions for 274224 repair kit to increase the performance of your model 1163 grease gun.
|
| DC-2186.pdf |
943Kb |
Details troubleshooting techniques for Series I PileDriver pump tubes. |
| DC-2185.pdf |
834Kb |
Description of troubleshooting techniques on all PM Series II airmotors and pump tubes. |
| DC-2184.pdf |
171Kb |
Provides tips on proper identification of Lincoln PowerMaster and Pile Driver pumps tubes that no longer have identification tags on them. |
| DC-2182.pdf |
658Kb |
Details operational tips to enhance operation of the 14.4 Volt PowerLubers. |
| DC-2179.pdf |
106Kb |
Provides details of possible grease contamination in extreme dusty conditions using QLS 401/421 pumps. |
| DC-2178.pdf |
415Kb |
Warnings against the use of "Gasoline and other more flammable liquids" with the 1335/6WB29 Lever Action Transfer Pump. |
| DC2174.pdf |
151Kb |
Updated 11-12-05. Provides importance of proper torque settings on SSV and SSVM Divider Valves. |
| DC 2172.pdf |
107Kb |
Details proper installation procedures for u-cups on 87500 reel. |
| DC2171.pdf |
104Kb |
Details Breakage of the 241789 Adapter on PM III Pumps and How to Prevent It. |
| DC-2164.pdf |
111Kb |
Electronic Meter selection criteria according to fluid being dispensed. |
| DC-2163.pdf |
101Kb |
Over the past several years Lincoln has made several series changes directed toward enhancing the performance of our 82206 Heavy Duty Reels, including the inlet swivel and outlet adapter. In an effort to help you better understand these enhancements; we have put together the following brief history depicting the changes. |
| DC-2159.pdf |
140Kb |
Provides detail on importance of proper installation of battery packs in RF meters. |
| DC-2158.pdf |
88Kb |
Describes new product offering to enhance performance of LFC 3000 in multi building installations. |
| DC-2148.doc |
258Kb |
Details potential field failures with our Quick Connect hose studs. |
| DC2145.doc |
149Kb |
Enhanced printed circuit boards in the QLS pump family and new programming features to allow for more customized applications.
|
| DC-2144.doc |
95Kb |
Details obsolescence of the 33153 pump cylinder gaskets and adherence to UL guidelines for repair of obsolete UL Transfer Pumps. |
| DC-2140.doc |
304Kb |
Provide details of Quality Improvements to 203 Pumps--discusses change from DIN connectors to Bayonet Style connectors |
| DC-2139.doc |
565Kb |
Details of kit for QLS 301/321 that will help eliminate grease separation issues.
|
| DC-2138.doc |
111Kb |
Describes introduction, benefits of new UV-Resistant P203 Pump Reservoirs |
| DC2129 Bulletin.doc |
168Kb |
New Seals for Inlet Swivel and Outlet Adapter on Model 82206 and 84275 Bare Reel Assemblies. |
| DC-2117.doc |
890Kb |
Describes possibilities of leakage around threads on model 226-14105-5 outlet adapter for 203 Pumps. |
| DC-2116.doc |
283Kb |
Importance of rubber drain tube on 203 Pumps(2 Pages). |
| DC-2115.doc |
110Kb |
Grease leakage at pressure relief valve on 203 Pumps. |
| DC_2113.pdf |
317Kb |
General troubleshooting for series 20, 25, and 40 air-operated pumps. |
| DC_2112.doc |
272Kb |
General air operated diaphram pump troubleshooting |
| DC_2111.doc |
192Kb |
General metering control valve troubleshooting
|
| DC_2110.doc |
192Kb |
General hose reel trouble-shooting/diagnostic guides. |
| DC_2109.doc |
112Kb |
82206 Reel inlet swivel leakage |
| DC-2090.doc |
79Kb |
90942 Safety Unloader seepage issues |
| DC2087.doc |
80Kb |
Upgrades to Low Pressure Air & Water Hose |
| DC2085.doc |
79Kb |
Properly Sized Hose Reel Clamps |
| DC 2086.doc |
80Kb |
This files defines the functions of the red, white, and blue wires on the 203 DC Pumps |
| DC2075.doc |
497Kb |
Potential problems with manifold assembly (270771) on FlowMaster Rotary Hydraulic Pumps. |
| PL2000.pdf |
231Kb |
A two-page instruction sheet with photos describing the process for installing the PL Retrofit Kit |
| SB2007.doc |
20Kb |
A one-page letter announcing the availability of the PL 2000 retrofit kits. The letter also describes Lincoln Industrial’s method of payment for Distributors retrofitting PL 2000s. |
| PL2000.doc |
926Kb |
A one-page form used by a Distributor to report completion of retrofitting a PL 2000. The form, when returned, triggers the payment for successfully completing installation of a retrofit kit. |
