|
|
 |
 Safe to use where electric or pneumatic motors may be hazardous.- Virtually eliminates concerns about air supply condition and exhaust emissions.
- Efficiently generates high material pressure and flow rate with minimum hydraulic power consumption.
- Few internal moving parts. No mechanical linkages or solenoids to fail or wear out.
- A completely internal changeover circuit requires no external signal for reciprocating action.
- A balanced cylinder design eliminates the need for separate up and down stroke adjustments.
- All key components are machined from steel or aluminum to ensure long service life in the toughest applications.
- Hydro-PowerMaster was designed and is manufactured under the strict conditions of an ISO 9001 registered quality system.
|
Model
|
Cylinder
Diameter
in. / cm
|
Piston
Rod Dia.
in. / cm
|
Stroke
Length
in. /cm
|
Hydraulic
Fluid Inlet
|
Hydraulic
Fluid Outlet
|
|
|
85300
|
2 / 5
|
1% / 3.5
|
6 / 15
|
SAE 8 female
|
SAE 10 femail
|
Hydraulic
Operating
Pressure Range
psi / bar
|
Operating
Temperature
Range
|
Hydraulic
Fluid Flow Consumption
Rate
|
Maximum
Recommended Continuous
Speed
|
Wetted
Part
Materials
|
|
300 to 1500
20.4 to 103
|
-30°F to 200°F
-34°F to 93°F
|
18.8 cu. in./cycle
or
1 gallon/12 cycles
|
75 cycles/minute
|
steel, aluminum, bronze, Nitrile, Teflon®, polyurethane
|
|
With
This
Pump Tube
|
Normal
Ratio
|
Drum
Size
|
Material
Outlet
NPTF
|
Max.
Hydraulic
Inlet Pressur
psi / bar*
|
Maximum
Delivery
Pressure
psi / bar
|
Max.Free Del. @75 Cycles/Min.
Gallons / Liters |
|
|
84985
|
1.5:1 |
55 gal
|
¾"
|
1500 / 103
|
2250 / 150
|
3.9 / 14.6 |
| 84983 |
| 84982 |
| 84981 |
| 84984 |
16 gal |
| 84986 |
Stub |
| 84987 |
| 84976 |
2.5:1 |
55 gal |
3750 / 258 |
2.2 / 8.6 |
| 84977 |
16 gal |
| 84978 |
4:1 |
55 gal |
6000 / 412 |
1.5 / 5.7 |
| 84979 |
16 gal |
| 84991 |
3:1 |
55 gal |
4500 / 310 |
2.0 / 7.5 |
| 84992 |
16 gal |
| 84993 |
4.5:1 |
55 gal |
7500 / 317 |
1.2 / 4.5 |
| 84994 |
16 gal |
| 84995 |
5:1 |
55 gal |
1250 / 86 |
1.0 / 3.7 |
| 84996 |
16 gal |
| 84997 |
7:1 |
55 gal |
850 / 58 |
7650 / 527 |
0.7 / 2.6 |
| 84998 |
16 gal |
See PowerMaster III section for pump tube specifications, mounting devices and accessories.
*Caution: Do not exceed maximum hydraulic inlet pressure listed for each motor/pump tube combination. |
|
With
This
Pump Tube
|
Normal
Ratio
|
Material
Outlet
NPTF
|
Max.
Hydraulic
Inlet Pressur
psi / bar*
|
Maximum
Delivery
Pressure
psi / bar
|
Max.Free Delivery @75 Cycles/Min.
Gallons / Liters |
|
|
84900
|
0.8:1
|
1½"
|
1500 / 103 |
1200 / 83
|
7.1 / 27.0 |
| 84901 |
1:1 |
1500 / 103 |
5.5 / 20.8 |
| 84902 |
1.5:1 |
2250 / 155 |
3.9 / 14.9 |
| 84904 |
1:1 |
1500 / 103 |
5.8 / 22.0 |
| 84921 |
0.4:1 |
600 / 41 |
14.3 / 54.0 |
| 84922 |
14.9 / 56.5 |
| 84923 |
0.2:1 |
300 / 21 |
27.6 / 104.5 |
See PileDriver III section for pump tube specifications, mounting devices and accessories.
*Caution: Do not exceed maximum hydraulic inlet pressure listed for each motor/pump tube combination. |
|
|
|
|
