Series SL-33

• For single-line, high-pressure central lubrication system
• For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2
• Output is externally adjustable
• Indicator stem permits visual check of injector operation
• May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11
• Individual injectors can be easily removed for inspection or replacement
• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel

Specifications:

• Series SL-33
• Output:
• Minimum: .001 cu. in. (.016 cc)
• Maximum: .003 cu. in. (.049 cc)
• Operating pressure:
• Minimum: 1200 psig (83 bar)
• Maximum: 3500 psig (241 bar)
• Typical: 1500 psig (103 bar)
• Vent: 200 psig (14 bar)

Note:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing. - 1/8" O.D. as standard. Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have nitrile packings (200°F max. (93°C)). Checking packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./ turn.

Series SL-32

• For single-line, high-pressure central lubrication system
• For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2
• Output is externally adjustable
• Indicator stem permits visual check of injector operation
• May be combined in a circuit of Injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11
• Individual injectors can be easily removed for inspection or replacement
• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel

Specifications:

• Series SL-32
• Output:
• Minimum: .001 cu. in. (.016 cc)
• Maximum: .008 cu. in. (.131 cc)
• Operating pressure:
• Minimum: 1200 psig (83 bar)
• Maximum: 3500 psig (241 bar)
• Typical: 1500 psig (103 bar)
• Vent: 200 psig (14 bar)

Note:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing. - 1/8" O.D. as standard. Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have nitrile packings (200°F max. (93°C)). Checking packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./ turn.

Series SL-32HV

• For single-line, high-pressure central lubrication system
• For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2
• Output is externally adjustable
• Indicator stem permits visual check of injector operation
• May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11
• Individual injectors can be easily removed for inspection or replacement

Specifications:

• Series SL-32HV
• Output:
• Minimum: .001 cu. in. (.016 cc)
• Maximum: .008 cu. in. (.131 cc)
• Operating pressure:
• Minimum: 1200 psig (83 bar)
• Maximum: 3500 psig (241 bar)
• Typical: 1500 psig (103 bar)
• Vent: 400 psig (28 bar)

Note:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing. - 1/8" O.D. as standard. Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have nitrile packings (200°F max. (93°C)). Checking packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./ turn.

Series SL-V

• For single-line, high-pressure central lubrication system
• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2
• Output is externally adjustable
• Indicator stem permits visual check of injector operation
• May be combined in a circuit of Injectors SL-32, SL-33, SL-V XL, SL-1 and/or SL-11
• Individual injectors can be easily removed for inspection or replacement
• Each SL-V injector includes a clear polycarbonate protective cap.

Specifications:

• Series SL-V
• Carbon steel
• Output:
• Minimum: .015 cu. in. (.25 cc)
• Maximum: .08 cu. in. (1.31 cc)
• Operating pressure:
• Minimum: 1850 psig (128 bar)
• Maximum: 6000 psig (413 bar)
• Typical: 2500 psig (172 bar)
• Vent: 1000 psig (69 bar)
• Manifold inlet: 3/8 in. NPTF(F)
• Injector outlet: 1/8 in. NPTF(F)

Note:

1. Injector manifolds have 13/32 in. (10.3mm) diameter mounting holes for 3/8 in. bolt.
2. Injectors have polyurethane seals. Check compatibility with synthetic lubricants.
3. Injectors rated for 180°F (80°C)max. ambient temperature, depending on lubricant used.
4. Injectors include fitting for filling feedlines via alternate outlet port.
5. Output with adjustment screw hand-tightened is .015 cu. in. Maximum output is achieved with five turns at .014 cu. in./ turn.

Series SL-V XL

• For single-line, high-pressure central lubrication system
• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2
• Output is externally adjustable
• Indicator stem permits visual check of injector operation
• May be combined in a circuit of Injectors SL-32, SL-33, SL-V XL, SL-1 and/or SL-11
• Individual injectors can be easily removed for inspection or replacement
• Each SL-V injector includes a clear polycarbonate protective cap
• Two SL-V XL injectors are required to replace one SL-11 injector

Specifications:

• Series SL-V XL
• Carbon steel
• Output:
• Minimum: .015 cu. in. (.25 cc)
• Maximum: .305 cu. in. (5.00 cc)
• Operating pressure:
• Minimum: 1850 psig (128 bar)
• Maximum: 6000 psig (413 bar)
• Typical: 2500 psig (172 bar)
• Vent: 1000 psig (69 bar)
• Manifold inlet: 3/8 in. NPTF(F)
• Injector outlet: 1/8 in. NPTF(F)

Note:

1. Injector manifolds have 13/32 in. (10.3mm) diameter mounting holes for 3/8 in. bolt.
2. Injectors have polyurethane seals. Check compatibility with synthetic lubricants.
3. Injectors rated for 180°F (80°C)max. ambient temperature, depending on lubricant used.
4. Injectors include fitting for filling feedlines via alternate outlet port.
5. Output with adjustment screw hand-tightened is .015 cu. in. Maximum output is achieved with 20-1/2 turns at .014 cu. in./ turn.

Series SL-1

• For single-line, high-pressure central lubrication system
• For dispensing lubricants compatible with flouroelastomer packings and viscosity up to NLGI No. 2
• Output is externally adjustable
• Indicator stem permits visual check of injector operation
• May be combined in a circuit of Injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-11
• Individual injectors can be easily removed for inspection or replacement
• Available in stainless steel SAE 316, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel

Specifications:

• Series SL-1
• Output:
• Minimum: .008 cu. in. (.131 cc)
• Maximum: .080 cu. in. (1.31 cc)
• Operating pressure:
• Minimum: 1850 psig (128 bar)
• Maximum: 3500 psig (241 bar)
• Typical: 2500 psig (172 bar)
• Vent: 600 psig (41 bar)
• Manifold inlet: 3/8 in. NPTF(F)
• Injector outlet: 1/8 in. NPTF(F)

Note:

1. Injector manifolds have 13/32 in. (10.3mm) diameter mounting holes for 3/8 in. bolt.
2. Injectors have flouroelastomer packings. Check compatibility with synthetic lubricants.
3. Injectors rated for 350°F (176°C)max. ambient temperature, depending on lubricant used.
4. Injectors include fitting for filling feedlines via alternate outlet port.
5. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with 8 turns at .009 cu. in./ turn.

Series SL-11

• For single-line, high-pressure central lubrication system
• For dispensing lubricants compatible with flouroelastomer packings and viscosity up to NLGI No. 2
• Output is externally adjustable
• Indicator stem permits visual check of injector operation
• May be combined in a circuit of Injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-1
• Individual injectors can be easily removed for inspection or replacement
• Available only as a single unit with 1/2" NPTF(F) inlet

Specifications:

• Series SL-11
• Carbon steel
• Output:
• Minimum: .050 cu. in. (.82 cc)
• Maximum: .500 cu. in. (8.2 cc)
• Operating pressure:
• Minimum: 1000 psig (69 bar)
• Maximum: 3500 psig (241 bar)
• Typical: 2500 psig (172 bar)
• Vent: 800 psig (55 bar)

Notes:

1. Injectors have flouroelastomer packings. Check compatibility with synthetic lubricants.
2. Injectors rated for 350°F (176°C)max. ambient temperature, depending on lubricant used.
3. Injectors include fitting for filling feedline via alternate outlet port.
4. Output with adjustment screw hand-tightened is .05 cu. in. Maximum output is achieved with 11-1/2 turns at .009 cu. in./ turn.