Modular Lube® Lubrication Systems

Divider valve accessories

UV Divider Valves | MC2-HP High Pressure Divider Valves | XL Divider Valves

UV Divider Valves

UV Divider Valves are designed to meter oil or grease in automatic or manual systems installed on all types of industrial machinery. Segmented baseplate assembly contains all inlet and outlet connections. Alternate outlet ports are located on the face of the divider valve which may be used for installation of performance indicators.

  psig bar  NPSF(F) NPSF(F)


87918 16 3500 240 1/4 in. (inlet)
1/8 in. Yellow chromate plated steel Flouroelastomer
87919 16 3500 240 1/8 in.(intermediate)
1/8 in.
Yellow chromate plated steel
Flouroelastomer
UV Baseplate and Tie Rod specifications:
          A B
Tie rod End section    in. mm   in. mm  
250290 87920 6 3 3.58 90.9 4.52 114.8
250291 87920 8 4 4.5 114.3 5.44 138.2
250292 87920 10 5 5.42 137.7 6.36 161.5
250293 87920 12 6 6.34 161 7.28 184.9
250294 87920 14 7 7.27 184.6 8.20 208.3
250295 87920 16 8 8.19 208 9.13 231.9

* Each tie rod model number includes 3 tie rods and 3 fastening nuts.
Note: Use 68645 closure plug to plug non-working outlets.

UV Divider Valve specifications:

Single outlet divider valves

Standard w/ right side cycle indicator  in.  cu. in. cc
882051 - 05S .010 .164
882101 - 10S .020 .328
882151 - 15S .030 .492
882201 882203 20S .040 .656
882251 882253 25S .050 .820
882301 882303 30S .060 .983
882351 882353 35S .070 1.147
882401 882403 40S .080 1.311

Twin outlet divider valves

Standard w/ right side cycle indicator  in.  cu. in. cc
882052 - 05T .005 .082
882102 - 10T .010 .164
882152 - 15T .015 .246
882202 882204 20T .020 .328
882252 882254 25T .025 .410
882302 882304 30T .030 .492
882352 882354 35T .035 .574
882402 882404 40T .040 .656

Model 882000 UV Bypass Block
Optional by-pass block permits addition or deletion of lubrication points without disturbing existing installations. Includes mounting screws and Buna-N seals.

MC2-HP High Pressure Divider Valves

MC2-HP High Pressure Divider Valves are designed to dispense either petroleum-based or synthetic lubricants in gas engine and compressor lubrication systems. Segmented baseplate assembly contains all inlet and outlet connections. Alternate outlet ports are located on the face of the divider valve which may be used for installation of performance indicators.

psig bar NPTF(F)  NPSF(F) UNF


16 7500 512 1/4 in. 1/8 in. 5/16 in. -24 Black chromate plated steel Flouroelastomer
MC2-HP Baseplate and Tie Rod specifications:
  Sections (qty required)
      A
Tie rod Inlet End Intermediate    in. mm 
236640 87955 87956 87957 (3) 6 3 5.09 129
236641 87955 87956 87957 (4) 8 4 6.00 152
236642 87955 87956 87957 (5) 10 5 6.91 176
236643 87955 87956 87957 (6) 12 6 7.81 198
236644 87955 87956 87957 (7) 14 7 8.72 221
236645 87955 87956 87957 (8) 16 8 9.63 245

* Each tie rod model number includes 3 tie rods. Each 87956 end section contains 3 tie rod nuts.
Note: Use 68645 closure plug to plug non-working outlets.

MC2-HP Divider Valve specifications:

Single outlet divider valves

Standard w/ right side cycle indicator  in.    cu. in. cc
876061 - 06S Single .012 .196
876091 - 09S Single .018 .295
876121 876123 12S Single .024 .393
876181 876183 18S Single .036 .590
876241 876243 24S Single .048 .787

Twin outlet divider valves

Standard w/ right side cycle indicator  in.    cu. in. cc
876062 - 06T Twin .006 .098
876092 - 09T Twin .009 .147
876122 876124 12T Twin .012 .197
876182 876184 18T Twin .018 .295
876242 876244 24T Twin .024 .393

Model 874000 MC2-HP Bypass Block
Optional by-pass block permits addition or deletion of lubrication points without disturbing existing installations. Includes mounting screws and flouroelastomer gasket plate.

XL Divider Valves

XL Divider Valves are designed to meter large volumes of oil or grease in manual or automatic lubrication systems for all types of industrial machinery. These units can be used in complete XL systems or integrated as a primary divider valve assembly in systems using UV divider valves as secondaries.
Solid one piece baseplate contains all inlet and outlet connections. Convenient front located ports on the divider valve are provided for installation of any desired performance indicators.

psig bar NPTF(F)  NPTF(F) NPTF(F)


12 2500 172 3/8 in. 1/4 in. 1/8 in. Zinc plated steel Buna-N
XL Baseplate specifications:
        A
   in. mm 
87030-3 6 3 5.34 136
87030-4 8 4 6.69 170
87030-6 12 6 9.38 238

Note: Use 67359 closure (1/4 in. NPT) plug to plug non-working outlets.

XL Divider Valve specifications:

Single outlet divider valves

Standard w/ right side cycle indicator  in.  cu. in. cc
87026-03S - 30S .060 .983
87026-05S - 50S .100 1.64
87026-08S - 80S .160 2.62
87026-10S - 100S .200 3.28
87026-12S - 120S .240 3.93
87026-15S - 150S .300 4.92

Twin outlet divider valves

Standard w/ right side cycle indicator  in.  cu. in. cc
87026-03T - 30T .030 .492
87026-05T - 50T .050 .820
87026-08T - 80T .080 1.31
87026-10T - 100T .100 1.64
87026-12T - 120T .120 1.97
87026-15T - 150T .150 2.46

Model 87028 XL Bypass Block
Optional by-pass block permits addition or deletion of lubrication points without disturbing existing installations. Includes mounting screws and flouroelastomer gasket plate.

Back to the top