Blow guns, tire inflators and siphon sprayers
System description:

Blow guns

Model 840            
  • Handy thumb-button design provides ease of operation
  • Brass stem and synthetic packaging for service life
  • Addition of air nipple permits quick connect or disconnect
  • 1/4 in. NPT(F) inlet; 7/64 in. outlet diameter

 

Model 950            
  • Same as model 840, except with air restricter
  • Nozzle inlet maximum pressure 30 psi (2.1 bar) complies with Federal Safety Regulation 50-204.8 and OSHA 1910 242.B

 

Model 960            
  • Light-weight cast aluminum pistol grip
  • 1/4 in. NPT (F) inlet; 7/64 in. outlet diameter; height 5-3/4 in. (146mm)
  • Nozzle inlet maximum pressure 30 psi (2.1 bar) complies with Federal Safety Regulation 50-204.8 and OSHA 1910 242.B
             
Model 940
  • Same as model 960 less air restricter
  • When used for large cleaning requirement or chip cleaning, regulated air pressure must not exceed federal recommended maximum
Model 5980            
  • Thumb control provides comfort and ease of operation
  • 1/4 in. NPT (F) inlet; 1/8 in. NPT (F) outlet
Model 5990            
  • Rubber tip will not scratch surfaces
  • Fits models 840, 940, 5980 blow guns, as well as many competitive models
  • 1/8 in. NPT (M) threads

Air-operated accessories

Model 939            

For attaching water service hose

  • Adjustable suction control varies fluid volume as needed
  • Strainer assembly in suction hose keeps out contaminants while assuring uninterrupted flow of fluid
  • 6 ft. (1.8 m) vinyl suction hose permits use with most any container from gallon just to 55 gal. (208 liter) drum
  • Convenient addition of air coupler nipple permits quick coupling to any air hose
  • Rust and corrosion resistant-- pistol grip handle includes brass stem and synthetic packing
  • Use with solvents or detergent solutions. Compatible with vinyl, aluminum and carbon steel
  • Standard air inlet 1/4 in. NPT (f)
  • Powerful spray. Maximum operating pressure 200 psi (14 bar)

 

Model 5983                        
  • Use with solvents or detergent solutions
  • 1/4 in. NPT (f) inlet
  • Maximum operating pressure 150 psi (10 bar)

 

Self-coiling air hose
Model 84606                        
  • Tough abrasive resistant material provides long service life
  • Coiled spring guards prevent kinking
  • 1/4 in. ID x 25 ft. (7.6 m) long extra length for those hard-to-reach places.
  • Working pressures up to 200 psi (14 bar). 1/4 in. NPT (m) fittings at each end.

 

Tire accessories

Model 80423
  • 12 in. (305mm) hose extension provides extra-reach capacity
  • Tapered chuck nut allows inflator to fit wheel covers on cars and light trucks
  • Dual chuck permits use on trucks with dual tires
  • Includes model 11659 nipple for use with model 815 coupler. Maximum inlet pressure 200 psi (14 bar)
  • 0 to 120 psi (0 to 8 bar) scale in 2 psi (0.14 bar) graduations
Lincoln Model 80423
Model 66951 air chuck
For inflating tire. 1/4 in. NPT(f) inlet.
Lincoln Model 66951