Lincoln Filters, Regulators and Lubricators

A well-planned compressed air system virtually ensures minimum pressure loss in the system and the removal of contaminants: water, compressor oil, etc.

System description:

Miniature units

Model 600003 miniature regulator            

All brass construction with Buna N diaphragm. For 1/4 in. pipe size. Maximum supply pressure: 300 psi (20.68 bar). Reduced pressure range: -40 to 180° F (-40 to 82° C). Diameter 1 3/8 in. (35 mm), height 2 3/4 in. (70 mm), weight 1/2 lb. (0.23 kg)

Model 600103 miniature filter

All brass construction with porous bronze filter (20 micron) element and shatter proof polycarbonate bowl. For 1/4 in. pipe size. Maximum supply pressure: 200 psi (13.79 bar). Maximum operating temperature: 120° F (49° C). Diameter 1 9/16 in. (40 mm), height 4 in. (102 mm), weight 3/8 lb. (0.17 kg)

Model 600203 miniature lubricator

All brass construction with shatterproof polycarbonate bowl. For 1/4 in. pipe size. Maximum supply pressure: 200 psi (13.79 bar). Maximum operating temperature: 120° F (49° C). Oil viscosity limitation not over 800 S.S.U. [SAE #30 not under 85° F (29.4° C)]. Diameter 1 9/16 in. (40 mm), height 4 3/8 in. (111 mm), weight 1/4 lb. (0.11 kg)

Model 602203 miniature lubricator

Aluminum construction with shatterproof polycarbonate bowl. For 1/4 in. pipe size. Maximum supply pressure: 150 psi (10.3 bar). Maximum operating temperature: 125° F (52° C). Diameter 1.45 in. (37 mm), height 5.23 in. (133 mm), weight 0.3 lb. (0.14 kg)

Model 85672 miniature filter-regulator with gauge-lubricator

For 1/4 in. pipe size. Maximum supply pressure: 150 psi (10.3 bar). Operating temperature range: 0 to 150° F (-18 to 66° C). Diameter 1.45 in. (37 mm), height 5.23 in. (133 mm), weight 1.23 lb. (0.6 kg)

Model 85674 miniature filter-lubricator

For 1/4 in. pipe size. Maximum supply pressure: 150 psi (10.3 bar). Operating temperature range: 0 to 125° F (-18 to 52° C). Diameter 1.45 in. (37 mm), height 5.23 in. (133 mm), weight 0.9 lb. (0.4 kg)

Gauges

Model 66100 gauge

Registers pressures up to 200 psi (13.79 bar). Dial diameter 2 in. (50.8 mm). 1/4 in. NPT (m) bottom connection. Calibrated both in psi and kg/cm2.

Model 66101 gauge

Same as model 66100 except 1/8 in. NPT (m) bottom connection..

Model 600401 gauge

Same as model 66100 except 1/4 in. NPT center back connection.

Model 66111 gauge

Same as model 66100 except registers to 5,000 psi (345 bar).

Regulators

Models 600004, 600006, 600008, 600012, 600016

 

Die-cast zinc construction with stainless steel strainer and renewable brass seat. Diaphragm and disc are oil-resistant Buna-N. Secondary pressure side gauge connections are 1/4 in. NPT (f) and are sealed with removable pipe plugs. Maximum supply pressure is 300 psi (20.68 bar) for all models listed. Operating range 0 to 250 psi (0 to 17.24 bar). Operating temperature range is 40 to 120° F (4 to 49° C).

    A B C D
   in.  in. mm   in. mm    in.  mm in.   mm lbs.  kg 
600004   1/4  3  76  6  152  1-3/8  35  2-3/8  60  1.8 0.8 
600006   3/8  3  76  6  152  1-3/8  35  2-3/8  60  1.8 0.8 
600008   1/2  3-9/16  90  7  178  1-1/2  38  3-1/4  83  2.8  1.3
600012   3/4  4-11/16  119  10  254  1-7/8  48  4-3/8  111  6.2  2.8
600016  1  4-11/16  119  10  254  1-7/8  48  4-3/8  111  6.2  2.8
                                   
Filters

Models 600104P, 600106P, 600108P, 600112, 600116

 

Die-cast zinc construction with stainless steel strainer and renewable brass seat. Diaphragm and disc are oil-resistant Buna-N. Secondary pressure side gauge connections are 1/4 in. NPT (f) and are sealed with removable pipe plugs. Maximum supply pressure is 300 psi (20.68 bar) for all models listed. Operating range 0 to 250 psi (0 to 17.24 bar). Operating temperature range is 40 to 120° F (4 to 49° C).

                                                               
    A B C D
   in. oz.  cm3   in. mm   in. mm    in.  mm in.   mm lbs.  kg 
600104P  1/4 142   2-15/16  75  5-5/8  143  5-1/8  130  2-13/16  71.4  1.8 0.8 
600106P  3/8 142   2-15/16  75  5-5/8  143  5-1/8  130  2-13/16  71.4  1.8 0.8 
600108P   1/2  227  3-3/4  95 6-1/4  159   5-5/8 143  2-13/16  71.4  2.8  1.3
600112   3/4  16  454  4-7/8  124  8-3/4  222  7-3/4  197  4-9/16  116  6.3  2.9
600116  1  16 454   4-7/8  124  8-3/4  222  7-3/4  197  4-9/16  116  6.3  2.9
                                   
                                                                               
Lubricators

Models 600204P, 600206P, 600208P, 600212, 600216

Constructed of die-cast zinc. Metal bowl with sight glass. Maximum supply pressure 250 psi (17.24 bar). Maximum temperature 150 F (66° C). Oil viscosity maximum not over 800 S.S.U. [SAE #30 not under 85 F (29.4° C)].

                                                               
    A B C D
   in. oz.  cm3   in. mm   in. mm    in.  mm in.   mm lbs.  kg 
600204P  1/4 142   2-15/16  75  7-5/8  194  5-5/8  143  2-13/16  71.4  2.2
600206P  3/8 142   2-15/16  75  7-5/8  194  5-5/8  143  2-13/16  71.4  1.8 1
600208P   1/2  227  3-3/4  95 8-1/8 206   5-3/4 146  2-13/16  71.4 3.3  1.5
600212   3/4  16  454  4-7/8  124 10-1/2  267  7-7/8  200  4-9/16  116  4.2  1.9
600216  1  16 454   4-7/8  124 10-1/2  267  7-7/8  200  4-9/16  116  4.2 1.9
                                   
                                                                               
Accessories

Model 82413 control assembly

Includes model 66100 gauge and model 600004 regulator. Inlet and outlet 1/4 in. NPT (f).

Model 600301 automatic drain conversion kit

Converts manual drain filter to automatic drain. Increases filter efficiency and eliminates problem of manual draining.