PMV grease pumps

Grease pumps with NLGI #1 grease

PMV 3 in. 50:1 pumps1
  • Reels with 50ft. (15.24m)x 3/8 in. ID hose (Model 94553)
  • 5/8 in. OD x 0.083 in. (2.11 mm) wall tubing
  • Control valve and swivel (models 3050, 81729)
  • 5/8 in. OD x 0.083 in. (2.11 mm) wall tubing
Pumping ratio 50:1
Air pressure 40 to 150 psi (2.7 to 10.3 bar)
Maximum output pressure 7,500 psi (517 bar)
Air inlet 3/8 in. NPT(f)
Material outlet 1/4 in. NPT(f)
Airmotor bore diameter 3 in. (76.2 mm)
Stroke 3-1/4 in. (82.5 mm)
Output per cycle 0.78 cu. in. (12.8 cm3)
Wetted parts Carbon steel, brass, zinc, polyurethane, nitrile
Free flow 168 cu. in./min. (2,753 cm3/min.)
Overall length (stub)
 35 lb. (15kg) 27-7/8 in. (708 mm)
120 lb. (54 kg) 36-3/8 in. (924 mm)
400 lb. (181 kg) 42-7/5 in. (1,089 mm)
PMV 4.25 in. 10:1 pumps2
  • Reels with 50ft. (15.24m)x 1/2 in. ID hose (Model 94354)
  • 3/4 in. OD x 0.109 in. (2.769 mm) wall tubing
  • Control valve and swivel (models 3050, 81729)
  • 1 in. sch. 160 pipe
Pumping ratio 50:1
Air pressure 40 to 150 psi (2.7 to 10.3 bar)
Maximum output pressure 7,500 psi (517 bar)
Air inlet 3/8 in. NPT(f)
Material outlet 1/4 in. NPT(f)
Airmotor bore diameter 4-1/4 in. (108 mm)
Stroke 3-1/4 in. (82.5 mm)
Output per cycle 1.47 cu. in. (24.1 cm3)
Wetted parts Carbon steel, brass, zinc, polyurethane, nitrile
Free flow 220 cu. in./min. (3,605 cm3/min.)
Overall length (stub)
120 lb. (54 kg) 36-7/16 in. (926 mm)
400 lb. (181 kg) 42-15/16 in. (1,091 mm)

All systems based on 100 psi (6.89 bar) air input and 70 °F (21 °C)
(1) Two simultaneous dispenses at 0.125 lbs./min. (56.7 grams/min) each
(2) Four simultaneous dispenses at 0.125 lbs./min. (56.7 grams/min) each