PMV oil pump accessories

PMV runaway controller

Model V340HH

Compatible with new and existing Lincoln PMV pumps, the runaway controller shuts off the pump and signals an alarm if the pump exceeds a preset cycle rate.

  • Fully electronic
  • Monitors and controls based on positive pump-cycle count
  • Operates independently of air supply volume and pressure
  • Prevents pump damage due to high runaway speeds if lubrication drum or tank is depleted
  • Limits spills if broken hose or line leak causes pump to run faster than preset cycle rate
Low-level cutoffs

Automatically shuts off flow of oil; keeps air out of the pump when tank or drum level is low. Recommended when dispensing oil through metering devices to conform with standards of the National Conference of Weights and Measures.

Model 82439 for 1-1/2 in. NPT suction tubes
Model 84946 for 1 in. NPT suction tubes
Model 275413 wall mount bracket for PMV pumps
Thermal pressure protection

Protect lubrication system components from high pressure spikes caused by temperature change in a closed fluid network.

   psi bar in. (NPT)
282876 Valve only 3:1, 5:1, 6:1 1000 68 1/2
275197 Valve only 3:1, 5:1, 6:1 500 34 1/2
282957 Valve only 3:1, 5:1, 6:1, 10:1, 12:1 1,500 103 1/2
277601-1 Kit with valve, hose, adapters PMV 5:1 and 6:1 900 62 Integrated
277601-2 Kit with valve, hose, adapters PMV 10:1 1,500 103  Integrated
Suction kit
Model 84945 suction kit

For transfer of product from drums, bulk tanks or reservoirs. Includes bung bushing suction tube, hose and coupling assembly.
Note: 2 x 1 in. (50.8 x 25.4mm) bell reducer required for use with model 1914, supplied by others- general plumbing part.

Model 85806

16 gallon (60 liter) suction tube.

Model 85807

55 gallon (208 liter) suction tube.

Model 85824 bung bushing

Screws in bung opening of 55 gal. (208 liter) drums and custom-built tanks to secure PMV pumps. Plated to resist rust. Threaded 2 in. NPT(m).

Model 277020 heavy-duty bung bushing

For outdoor use. Protection from the environment is provided by plating two gaskets.

Model 85826 drum cover for 120 lb. (54 kg) drum

For mounting PMV pumps on open 120 lb./16 gal. (54 kg/ 60 liter) drums.

Model 85827 drum cover for 400 lb. (181kg) drum

For mounting PMV pumps on open 400 lb. or 55 gal. (181 kg or 208 liter) drums.

Model 83115 lubrication truck drum cover tie rod assembly for 400 lb. (181 kg) drum

Secures PMV pump and 400 lb. or 55 gal. (181 kg or 208 liter) drum to lubrication truck deck.

Model 82989 lubrication truck drum cover tie rod assembly for 120 lb. (54 kg) drum

Secures PMV pump and 120 lb. or 16 gal. (54 kg or 60 liter) drum to lubrication truck deck.

Model 273299 air inlet hose

3/8 in. ID x 5 in. (127 mm) air hose

Quarter-turn valves
Model 66084 medium pressure

1/2 in. NPT(f), 600 psi (52 bar) maximum working pressure.