PileDriver III

Lincoln’s strive for high quality products can once again been seen with the PileDriver III.

System description:

Lincoln’s strive for high quality products can once again been seen with the PileDriver III. The Series III motor is fully pneumatic and its reverse stroke direction without mechanical linkages is simpler and more reliable that older designs. Also the PileDriver III pump offers a choice of inlets for thick material or higher flow rates.

PileDriver pump selection chart

Pressure primers

Mounting accessories


Series III Air Motor Features and Benefits:
  • These fully pneumatic Air Motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs
  • Air motors are 3-4-6-8-10 inches (76-101-152-203-254mm) diameter
  • An air Signal Valve activates a Relay Valve at the end of each stroke
  • The shifting Relay Valve changes the Power Valve position
  • The Power Valve shifts air flow to the opposite side of the Power Piston to reverse stroke direction
  • Modular Construction: Air Motors are easy to install, maintain, and upgrade with options like AirBrake™
  • Built-in Muffler: Meets or exceeds OSHA requirements at recommended air pressures
  • AirBrake Options: Stops runaway pump, prevents product spills, damage and excess wear, and activates an optional remote alarm device. AirBrake available already installed (refer to pump specification charts) or can be ordered separately as Model 85317. For remote monitoring of AirBrake, order model 244398 signal kit.

PileDriver Series III Pump Tube Features and Benefits:
  • Machined inlet casting: Set screws secure the inlet assembly and permit 360° outlet adjustment to facilitate system plumbing and provide for easy pump removal/replacement
  • Cartridge type gland with scrapers and patented protection bushing: Extends the life of gland packings by protecting them from excessive material build up and pressure fluctuations. Cartridge removes easily for routine service
  • Straight through pump tube and piston port design: Reduces internal friction and the opportunity for solids entrapment
  • Load bearing, chrome-plated internal pump tube surface: Distributes forces between gland and pump tube to prolong seal life
  • Choice of inlets: Shovel type for thick material or flat check for higher flow rates

85922 High-Volume Stub Mount Pump Tube
Lincoln has introduced its new Model 85922 PileDriver III Stub Mount Pump Tube for heavy-duty transfer and dispensing applications. When combined with Lincoln’s PowerMaster air motors, this new pump tube offers a wide range of options to provide necessary volume and pressure for high-output transfer and multi-reel dispense systems.

The pump tube features large ports to reduce resistance and improve flow, and its six-inch stroke allows the pump to work easily to deliver maximum volume. The PileDriver and PowerMaster combination offers durability, dependability and ease of maintenance over the life of the pump.