PileDriver® III pressure primers

Pressure primer features:

Positive priming force on the materials.

  • Downward force of the follower forces material into the pump inlet. This assures positive priming of high-viscosity materials.
The follower has an elastomer seal.
  • Wipers, single o-rings, or double o-rings seal against the material container's sides. This prevents drying and contamination of the material and wipes the container's insides clean.
The 4-way directional valve controls up/down movement of the follower. The prime unit remains couples to the air system at all times.
  • Use of an air regulator and gauge is recommended.
Primers are available for a wide range of material container sizes.
Model 2718
Single post for viscous material over 500k centipoise.
  • For 5-gallon drum
  • Model 83943 portability kit available for model 1701 (Includes axle and wheels)
Model 83274
Single post for viscous material over 500k centipoise.
  • Use only 8 in. and smaller air motors
  • For 55-gallon drum
Model 2719
Single post pump hoist & follower for low- to medium-viscosity materials in the 100k to 200k centipoise range.
  • Use only 8 in. and smaller air motors
  • Uses gravity priming pressure
  • For 5-gallon drum
Model 1735
Twin 3 in. post for viscous materials in the 200k to 500k centipoise range.
  • For 55-gallon drum
Model 1765
Twin 6 in. post for viscous materials over 500k centipoise.
  • For 55-gallon drum

 

Model 2719

2718 30-150 2-10 4.4 .3 6.3 .44 42.5 108 50.25 128 22.25 x 22.25 600 x 600
2719 40-200 3-14 NA   NA   73 185.4 110.5 280.7 26 x 26 700 x 700
1735 40-150 3-10 2.7 .2 3.7 .26 66.125 167.6 103 261.6 24 x 36 600 x 1000
1765 40-100 3-7 8.5 .57 12 .8 66.125 167.6 103 261.6 24 x 36 600 x 1000
83274 40-100 3-7 5 .35 7.1 .5 89 226 89 226 26 x 26 700 x 700
Model 2718
Model 1735
Model 1765
Model 83274