Elevator & primers for PumpMaster® III pumps

Elevator, primer and pressure primers

Lincoln's mounting accessories include an elevator (Model 1709) to facilitate drum change-over by lifting the pump from an empty drum and lowering it into a new drum with minimum effort. Primers and pressure primers are available for positive priming of viscous materials which are forced into the pump inlet by the downard force of the follower. Models are available for most applications from 5-gallon pails to 55-gallon drums. Models include followers with single O-ring seals for 5-gallon pail units and double O-rings for 55-gallon drum units, which seal the container of material from outside contamination and drying while wiping the container's side clean.

Pressure primers include a 4-way valve which permits the air supply to be coupled to the unit at all times. Use of an air regulator and gauge is recommended. In order to prevent damage to pumps caused by operating after a drum is empty, a low-level air cut-off assembly is recommended.

Model 1709
Single post elevator

  • For 55-gallon drum
Model 2716
Single post pump hoist & follower for low- to medium-viscosity materials.
  • 100k to 200k centipoise range
  • For 55-gallon drum
Model 1701
Single post for viscous material over 500k centipoise
  • Model 83943 portability kit available for model 1701 (Includes axle and wheels)
  • For 5-gallon drum
Model 1704
Single post for viscous material over 500k centipoise
  • For 55-gallon drum
Model 1736
Twin post for viscous materials.
  • 200k to 500k centipoise range
  • For 55-gallon drum

Model 1709

1709 50-200 3.4-14 NA   NA   73 185.4 112 284.5 - -
2716 40-200 2.7-14 NA   NA   73 185.4 110-1/2 280.7 12-1/2x 14 317.5x 355.5
1701 30-150 2-10 4.4 0.3 6.3 0.44 42-1/2 108 50-1/2 128 22.25 x 22.25 600 x 600
1704 40-100 2.7-7 5 0.35 7.1 0.5 89 226 89 226 26 x 26 700 x 700
1736 40-150 2.7-10 2.7 0.2 3.7 0.26 66-1/8 167.6 103 261.6 24 x 26 600 x 100
Model 1701
Model 1704
Model 1736
Model 2716