Optional kits for PumpMaster® III pumps

Patented leakless gland assembly

The gland seal of all reciprocating positive displacement pumps in its weakest point and is the single most common cause of pump failure, lost downtime and maintenance expense. Lincoln's new gland design uniquely addresses the causes for premature gland seal failure.

A special protective bushing (or sleeve) with concentric grooves creates a labyrinth path to reduce the internal operational pressure as well as the pressure fluctuations developed during pump stroke changeover.

Leakless gland assembly is standard with packed piston pumps and is available for all PowerMaster III pumps as an accessory.

  • US Patent No. 4,976,192
Gland protection sleeves
86214 All ball foot design pump tubes
86215 84997 & 84998
86216 84993 & 84994
86217 84995 & 84996
86218 84991 & 84992
Model 86213 Lube cup kit

For all PowerMaster™ III pump tubes. Used in conjunction with the gland protection sleeve to prolong service life of gland packing. Prevents material from drying out on plunger.

Packing kits for PowerMaster™ III pump tubes
Lincoln offers alternate packing kits of PTFE for some PowerMaster III pump tubes because many materials used in today's manufacturing environment may not be compatible with the standard seals. Please consult Lincoln for compatibility of the material to be dispensed with standard packings or alternate packing kits.
PTFE kit model 84502 compatibility:

  • Pump tube model number:
    • 84982
    • 84984
    • 84985
    • 84986
    • 84987

Model 86268 3" Male camlock adapater for PowerMaster™ pump tubes
Adapts Lincoln PowerMaster pump tubes to tanks and totes equipped with 3" female mil spec camlock outlet.

Drum covers

Model 81412
Standard 55-gallon drum cover for mounting PowerMaster III series drum pumps on full, open drums.

Model 83166
Special 55-gallon drum cover for mounting PowerMaster III series drum pumps on full, open drums. Includes port for installation of material agitator.

Model 81538
Standard 18-gallon drum cover for mounting PowerMaster III series drum pumps on full, open drums.

Model 81412
Model 83166
Model 81538
Follower plates

Model 83369
For 400-pound drums.

Model 84780
For 120-pound drums.

Other accessories

Model 83132 Bung bushing
This 55-gallon drum bung bushing screws into the bung opening of the drum to secure any Lincoln PowerMaster III pump.

Model 84963 Flange mounting assembly
Used for rigid mounting of PowerMaster III pumps to the top of fabricated bulk tanks.

Model 84826 Wall mount bracket kit
For PowerMaster III air motor assemblies.

Model 83132
Model 84963
Model 848261

Model 84945 Suction kit
Used with PowerMaster III stub pumps for convenient transfer of petroleum products from drums, bulk tanks or reservoirs. Includes bung bushing suction tube, hose and coupling assembly and other hardware. 2" x 1" bell reducer required- not included.

Model 16177 Foot valve adapter
Converts inlet of models 84984 and 84985 Ball-type PowerMaster III pumps to 1-1/2 in. NPTF female thread for attaching extension pipe.

Model 83727 Stand pipe & Model 83732 Adapter kit
Use of model 83732 adapter & bracket kit will enable PowerMaster III pumps to be assembled to model 83727 stand pipe for pumping from bulk tanks. Inlet: 3 in. NPT(f)

Model 84945
Model 16177
Model 83727
Drum dollies

Model 84377
55-gallon (400 lbs) band-type drum dolly with four swivel casters and screw clamps.

Model 84192
16-gallon (120 lbs) band-type drum dolly with four swivel casters and screw clamps.

Model 84377